Ritver Exterior Wall Putty

Ritver Stucco Putty Exterior (product code PW 2507) is an acrylic copolymer emulsion designed to fill and smooth surface irregularities, cracks, and flaws on both interior and exterior surfaces. It prepares the surface for a smooth application of subsequent paint coats.  Key featuresComposition: Acrylic copolymer emulsion.Application: Water-based formula that dries to a smooth, level finish.Color: White.Substrates: Suitable for use on a variety of surfaces, including:ConcretePlasterMasonryGypsumWoodPack sizes: Available in 3.6-liter gallons, 18-liter drums, and 200-liter metallic drums. Surface preparation and applicationFor the best results, Ritver recommends following specific surface preparation steps before applying the putty. On concrete, plaster, and masonry:Ensure the surface is clean and dry, free from all contaminants.Remove any laitance (a weak, powdery layer on concrete) using a wire brush or sweep blast.Apply one coat of Ritver PVA Primer and allow it to dry completely before applying the putty. On wood and timber:Clean and dry the surface, removing any contaminants.Apply a coat of Ritver Wood Preservative compound.Prime the surface with a good coat of Ritver Wood Primer and allow it to dry before applying the putty. Application method: The putty can be applied with a steel trowel or knife to fill imperfections, then smoothed to a level finish. Storage and safetyStorage: Store the product in a cool, dry, and well-ventilated area, away from direct sunlight.Shelf life: Can be stored for up to 18 months in its original, sealed container when stored under recommended conditions.Safety: The material is non-flammable, but use it in a well-ventilated area. Avoid contact with eyes and skin.