Ritver Gypsum Jointing Compound

Ritver Gypsum Joint Compound is a water-based acrylic product designed to fill cracks, joints, and other surface imperfections on interior gypsum boards and plastered surfaces. The compound creates a smooth, even surface, making it ready for painting. Ritver Paints & Coatings, the manufacturer, is a Middle East-based company that offers a wide range of paint and coating products.  Product featuresFormulation: It is a water-based compound made from an acrylic copolymer, pigments, and fillers. This composition gives it good alkali resistance.Finish: The compound has a smooth, buttery texture when applied and dries to a flat, matte finish.Durability: The formula is designed for thick applications without peeling or flaking after drying.Intended use:Filling and smoothing joints and surfaces on gypsum boards.Leveling spray plasters and other cementitious surfaces.Filling hairline cracks and indentations in interior walls and ceilings.Can also be used on certain wood applications.Application area: For interior use only. Application detailsBefore applying Ritver Gypsum Joint Compound, ensure the surface is clean, dry, and free of contaminants. Preparation: A primer, such as Ritver PVA Primer Sealer, should be applied and allowed to dry before applying the compound.Mixing: For easier application, 5% to 10% of "sweet water" (clean, fresh water) can be added.Application: The compound should be applied evenly with a putty knife or a broad-bladed knife.Drying: At 30°C (86°F), the compound is set to the touch in 30 minutes to 1 hour. It is ready for a second coat after 3 to 4 hours.Finishing: After drying, the surface can be lightly sanded to remove imperfections and achieve a smooth finish.