Ritver Therm Aluminium Heat 600c

Ritver Therm Aluminum Paint Heat 600C is a high-temperature resistant coating designed for metal surfaces exposed to extreme heat, such as kilns, exhaust pipes, and boilers. The paint is based on inorganic binders and uses a thermally stable aluminum pigment. Product specificationsTemperature resistance: Resists continuous exposure up to 500°C and intermittent exposure up to 600°C.Appearance: Bright aluminum with a satin or matte finish.Application method: Can be applied directly onto a properly prepared metal surface. Application by spray is recommended for best results.Curing process: The paint air-dries, but requires curing at 200°C to 250°C for 30–60 minutes after application to achieve its best resistance performance.Surface preparation: To ensure maximum heat resistance, the surface should be blast-cleaned to a "near white metal" standard (SSPC SP 10 or ISO 8501-1 SA 2.5) and be free of all contaminants.Recommended uses: Suitable for the exterior surfaces of industrial equipment like kilns, furnaces, boilers, exhaust systems, and pipelines. Important considerationsPriming: Can be applied over an inorganic zinc coating, but this will limit the temperature resistance to 400°C due to the melting point of zinc.Application conditions: For proper drying, apply in a well-ventilated area and avoid high humidity (above 95%). The surface temperature must be at least 3°C above the dew point.Safety: The paint has a low flash point (28°C) and contains flammable solvents. It is essential to ensure adequate ventilation and avoid contact with skin and eyes during application. Where to buyRitver Paints & Coatings has offices and suppliers in several countries, including the UAE, Oman, and Saudi Arabia. You can also find Ritver products through various distributors and trading companies. For specific purchasing options in your area, contact Ritver's customer care or check online retailers. For more detailed technical data or advice, you can reach out to Ritver's Technical Service Department.