High Performance Gas Detector Lf / Gd

The LF/GD High Performance Gas Detector is used to detect various types of combustible gas. It is used mainly where there are possibilities of gas leakage like in chemical plants, gasoline stations, pharmaceutical factories, etc. When the detector is activated, the red LED (Alarm LED) lights and the internal buzzer will give an alarm sound. The green LED shows the presence of the mains power supply. When first installed, the yellow LED (Warm-up LED) will light for 10 seconds until the sensor compensates to its surrounding. Depending on the monitored gas, the unit must be placed higher (for methane) or lower (for propane, butane) then at the probable gas leak point. The horizontal distance should not be more than 3 meters and the detectors must not be placed in humid or drafty areas. It is suggested that the detector is tested or good operation every 6 months or if it changed position. It contains a gas leakage density rate indicator equipped with 9 different levels. The detector’s design widely applies to all kinds of industrial and commercial constructions with its high resistance to humidity, high reliability and ease of installation. • Gas Lev el Indicators • Power On, Gas Alarm and Warm-up LED Indicators • Reset Button • Built-in Buzzer • Gas Sensitive Sensor • Auto Analysis • Detects Combustible Gases • Quick Response Time • Relay Output • Rigid steel Powder Coated Cabinet • 220V AC Operation • Wall Mount